Don’t Ignore That Toilet That Runs Nonstop!
- By: Amer ZaghloulehUncategorizedComment: 0
Do you have a toilet in your home that won’t stop running? If so, you’re not alone! Unfortunately, this is a common problem in most households. And while you may think that a toilet that runs nonstop is a minor issue and decide to ignore it, it could cost you money and peace of mind.
This article explains why your toilet keeps running and shares some basic ways to troubleshoot it and get it to stop running.
Why Does Your Toilet Keep Running?
There are several common reasons why your toilet keeps running, but the most common are:
A Clogged Toilet
This is the most common reason for a toilet to keep running. If your toilet is clogged, it will continually try to flush, which can cause the water level in the tank to rise and the pump to turn on.
A Defective Flapper
The flapper is a rubber flap that covers the hole at the bottom of the tank. If the flapper is defective, it can cause the water level in the tank to rise and the pump to turn on.
A Defective Fill Valve
The fill valve is responsible for filling the tank with water after each flush. If the fill valve is defective, it can cause the water level in the tank to rise and the pump to turn on.
A Defective Flush Valve
The flush valve is responsible for emptying the tank after each flush. If the flush valve is defective, it can cause the water level in the tank to rise and the pump to turn on.
An Improperly Installed Wax Ring
The wax ring is a rubber ring located at the toilet’s base. If it’s not installed correctly, it can cause water to leak from around the base of your toilet, which will raise your water bill and make your toilet run continuously.
A Defective Overflow Tube
The overflow tube is a pipe that connects to the top of the toilet tank. If the overflow tube is defective, it can cause water to leak from around the top of your toilet, which will make your toilet run continuously.
Loose Water Supply Line
The water supply line is a pipe that connects the toilet to your home’s plumbing system. If it’s not tight, it can cause water to leak from around the base of your toilet.
A Cracked or Broken Tank
A cracked or broken tank can cause water to leak from the tank, which will raise your water bill and make your toilet run continuously.
Ways to Troubleshoot Your Toilet to Get It to Stop Running
If you’re having problems with your toilet and it’s running nonstop, there are a few basic things that you can do to try to fix the problem:
– Check the water level in the tank. If it’s too high, then your toilet will keep running nonstop until you lower it to the correct level. This can be done by adjusting the float or adjusting the height of your toilet seat.
- Flush a few times with cold water to see if that helps clear the clog.
- Check if the flapper is closing properly and needs to be replaced.
- Replace the fill valve, flush valve, or wax ring (if necessary).
- If you suspect that your water supply line is loose, tighten it up.
- If you think your tank may be cracked or broken, replace it.
If you’ve tried all these solutions and your toilet is still running nonstop, then you may need to call a plumber for assistance.
Get Expert Plumbing Help!
Are you having problems with your toilet, and it’s running nonstop? Don’t hesitate to call the Santa Cruz plumbers from Anytime Plumbing for assistance. We’ll be able to troubleshoot the problem and fix it quickly and efficiently.
